Lo'n'Slo is a safe and convenient way to lower both the Total Alkalinity and the pH of your hot tub water.
Pre-dissolve the required amount of SpaGuard Lo'n'Slo in clean, warm water in a clean container. Turn on your pumps and pour the mixture evenly around the perimeter of your hot tub.
To reduce the pH... Add SpaGuard Lo'n'Slo at a rate of 11g per 1000 litres of spa water. Wait 2-3 hours and then re-check the pH level. If the pH is still too high then repeat the procedure.
To reduce the TA... Pour granules in from arms length above the water surface.
NB If you are unable to maintain an appropriate pH level in your tub the most likely cause is that the the Total Alkalinity is too low. Always correct the Total Alkalinity balance before you attempt to balance the pH.
