Water Cushion

DISCOUNTED FROM £24.99

A water cushion designed for spas.
For those looking for a little more comfort or a little more height.


Directions for use:

1. Open the valve on the bottom of the water cushion.
2. Submerge the cushion under the spa water (make sure the safety tab is open).
3. Fill with water until the desired firmness is attained.
4. Lay the cushion upside down with the valve and suction cups on the seat surface.
5. Slowly press the air out of the cushion.
6. Close the valve.
7. Test the pillow. Add or subtract water as needed.
8. For optimum comfort, do not over fill the cushion.

If your cushion is still buoyant and difficult to submerge, you may need to add more water or extract more air.

£24.99  £9.99