Balance Pak 200 is a safe and convenient way to increase the pH of your hot tub water when the level drops below the ideal range.
Add SpaGuard Balance Pak 200 at the rate of 11g per 1000 litres of water. Pre-dissolve the product in a clean container with clean warm water. Pour the solution around the spa perimeter and the keep the pumps running.
Check the pH level again after 2-3 hours and, if it is still too low, repeat the above procedure.
If you are unable to maintain an appropriate pH level in your tub this the most likely cause is that the the Total Alkalinity is too low. Always correct the Total Alkalinity balance before you attempt to balance the pH.
